Steps Lonsdor K518ISE Read Hyundai i10 47 Pin Code and Program Smart Key by OBD

Lonsdor K518 key programmer is the first tool to read Hyundai / Kia 46/47/8A smart key PIN code via OBD, all key lost included.

Here’s the step by setp instruction on how to read Hyundai 47 smart key pin code and program smart key by OBD using K518ISE.

Following detail steps

Step 1: Read Pin Code

Connect K518 host with vehicle via OBD diagnostic socket

Turn ignition ON

Select Immobilizer->Hyundai->Read PIN Code

Select read pin code from 47 Smart Card

Turn ignition off.

Open and close door on the driver side once

Comminciating…

Lonsdor K518ISE will display vehicle part number and software version

Read 6-digit pin code success.

Step 2: Program Smart Key

Choose Select from type-> Smart key-> Type 7 (without card slot CAN)-> Program Smart Key

All smart keys need to program, otherwise will not able to start vehicle

Press OK to continue

Turn ignition off. Open and close driver door once

Lonsdor K518 requires to enter 6-digit pin code to access

Enter pin code read from Step 1 and confirm.

Configuring system

Prepare keys to program.

Press OK and hold the Start button with key head within 5 sec till immobilizer indicator goes on.

Test the smart key.

Done!

http://www.obd2shop.co.uk/producttags/lonsdor-k518ise.html

Source from :
http://obd2shop-co-uk.over-blog.com/2017/11/how-lonsdor-k518ise-read-hyundai-i10-47-pin-code-and-program-smart-key-by-obd.html