How to program Ferrari 458 by using Lonsdor K518ISE(video guide)

This post on how to program Ferrari 458 by using Lonsdor K518ISE.

Step 1: Backup Immo Data

Connect K518ISE host with vehicle via diagnostic socket
Select Immobilization->Ferrari->458->Immobilizer->

Select Backup Immo Data function

Turn ignition ON

Communicating

K518ISE will show hardware and software information

Turn ignition OFF

Reading immo data, wait for 6 minutes

Lonsdor K518ISE will read Ferrari 458 pin code and key security data after 6 minutes

write down the pin code

save immo data as bin format

Backup success

Step 2: Program Key

Select Program Key function

The original working key also need to program.

New key to program must be a customized or a pre-written key

Turn ignition ON

Lonsdor K518 then will require to enter PIN code to access

Enter 5-digit pin code and confirm

Number of keys programmed: 1

Press YES to program next key or press NO to go back

Program key complete

Step 3: Program Remote

Select Program Remote function

Turn ignition ON

Again enter PIN code here

Hold remote key to be programmed in hand

Click OK

Click on remote control for 3 sec within 15 sec

press any button on remote key for 3 sec

Number of remote control programmed: 1

Press YES to program next remote

Program remote complete.

Lonsdor K518ISE Key Programmer for sale: http://www.obd2shop.co.uk/wholesale/lonsdor-k518ise-key-programmer.html

Video guide: